EV Charging Explained: AC, DC, Fast Charging and High-Power Charging
A charger's kW rating works a bit like a speed limit: it tells you the maximum, not how fast you'll actually go. If electric cars are new to you, here's a plain guide to AC and DC, kW and kWh, and why the number on the charger often isn't what your car gets.

The short version: the charger's number is the most it can give, your car has limits of its own, and the speed changes as you charge.
Two kinds of electricity
The grid supplies alternating current, or AC. An electric vehicle (EV) battery needs direct current, or DC, to charge. So somewhere between the grid and the battery, AC has to be turned into DC, and where that happens is the whole difference between AC and DC charging.
With AC charging, the car does the conversion itself, using a built-in part called the onboard charger.
With DC charging, the conversion usually happens in the charging equipment before the electricity reaches the car, and the onboard AC charger is bypassed. Volkswagen credits this with allowing higher charging power.
Here's why that matters. On AC, the onboard charger sets the ceiling. Picture a car whose onboard charger tops out at 7 kW, plugged into a 22 kW AC post: it still won't charge faster than 7 kW. That doesn't mean the post is faulty; the car has an AC limit of its own. That's why your own car's AC charging limit is worth finding out.
Power and energy: kW and kWh
Two units do most of the work here, and they're easy to mix up. Think of a car journey. A kilowatt (kW) is like your speed: how fast energy is flowing at that moment. A kilowatt-hour (kWh) is like the distance covered: how much energy has moved in total.
Charge at a steady 40 kW for an hour and 40 kWh has flowed, just as driving at 40 km/h for an hour covers 40 km. Battery size is given in kWh, and so is the energy you pay for at a public charger: ESB ecars, for instance, prices energy per kWh. How much energy you need, and the power at which it arrives, determine how long you'll be waiting.
The number on the sign
A charger's kW rating is the most it can deliver. Home charging points in Ireland will typically only support up to 7 kW - which means that, in theory, it can add 7 kWh to your battery in one hour. So, for a car with a 56 kWh battery, would it take around 8 hours to go from zero to one hundred percent charge?
Yes, and no.
So let's dive into that now. Whether your car gets near it depends on the car's own limit and on the session itself. There are some additional factors that come into play. A charge point's maximum rate is one of the factors, along with battery size, how full the battery already is (its state of charge) and temperature.
So charging power isn't a fixed number; it changes as the session goes on. A winter test published in January 2026 by the German motoring club ADAC shows this nicely. ADAC ran a Hyundai IONIQ 5 with the 84 kWh battery and rear-wheel drive through a simulated motorway drive at 0°C in its lab, then plugged it into a 300 kW DC charger. It went from 10% to 80% in 19 minutes. ADAC's chart shows the power changing throughout, with a highest reading of about 257 kW, below the charger's 300 kW rating.
That's one car under one set of lab conditions in Germany. A different car, battery temperature or charger could tell a different story. A graph showing how charging power changes as the battery fills is called a charging curve; depending on the car, power may fall as the battery gets fuller.
The charging curve means that when charging the car, the charging may start at a very high speed and then after reaching 80% charge in the battery, the car starts to lower the speed at which it is charging the car. It does this to protect the battery and extend its longevity.
A crude comparison we've seen is comparing the charging curve to pouring a soft drink from a can into a glass - at first you pour quickly, but as the liquid and fizz comes close to the top you pour less quickly to ensure that the fizz and liquid don't spill over the brim.
How fast you pour and how much you slow down towards the end is based on your previous experience pouring soft drinks. Likewise, the Battery Management System (or BMS) on a car is programmed based on extensive manufacturer and industry experience with battery charging to know when it can charge at full speed and when to slow down.
Why the average matters
To estimate how long a charge will take, you need the average power going into the battery over the whole session, not the peak, and certainly not the charger's headline figure.
Here's a simple made-up example. Say a car has 60 kWh of usable battery and you charge from 20% to 80%. That's 60% of the battery, or 36 kWh (60 × 0.6). If an average of 40 kW goes into the battery over that time, it takes 36 ÷ 40 = 0.9 hours, or 54 minutes.
Divide the same 36 kWh by a charger's 150 kW headline instead and you'd get about 14 minutes. That would need an average of 150 kW actually reaching the battery, and as the ADAC test shows, the power doesn't sit still. At the other end of the scale, if a steady 7 kW reached the battery on AC, the same 36 kWh would take a little over five hours (36 ÷ 7).
The example leaves out parking, plugging in, starting the session and any pauses. It also assumes every 1% of charge holds the same amount of energy. The energy measured by the charger can be more than what ends up stored because some is used by the car or lost along the way. So the kWh charged for and the kWh added to your battery won't necessarily match.
Cold batteries, warm batteries

Temperature deserves its own mention. All EV manufacturers acknowledge that EVs take longer to charge in the cold, the battery temperature and weather affect actual charging times.
Because of that, some cars can get the battery ready before a fast charge, which is usually called preconditioning. Whether your car has something similar, and how it works, depends on the model.
In Germany, the ADAC ran tests when fast-charge preconditioning wasn't active; ADAC says the motorway drive had already warmed the battery enough. So if the first fast charge on a frosty morning feels slower than the brochure suggested, temperature could be part of the reason.
Why 10% to 80%?
You'll see some charging times quoted from 10% to 80%.
It's a useful starting point for comparing cars, but the same percentages alone don't guarantee a fair comparison: battery size, the charger and conditions matter too. Nor is it an instruction for how you should charge. Whether stopping at 80% makes sense for you depends on your car, how far you're going and where the next charger is.
Plugs: Type 2, CCS and CHAdeMO
Not every car fits every charger. The EU's European Alternative Fuels Observatory (EAFO) notes that connectors and car sockets vary between regions and models. In Europe, you may come across these names:
Type 2, sometimes called Mennekes, for AC charging.
CCS Combo 2, short for Combined Charging System, for DC (fast) charging.
CHAdeMO, a DC standard that originated in Japan, typically for the older generation Nissan Leaf, and is found on some cars and chargers. However, this is becoming significantly less popular as Type-2 and CCS2 have become the de facto standards across Europe.
In EAFO's terminology, a charging point serves one car at a time, though it may have more than one connector. Cables are another thing to watch. EAFO says fast charging stations commonly have the cable attached, while ESB describes both points with an attached cable and points where you use your own. Before setting off, check which connector your car takes and whether you'll need to bring a cable.
Fast, rapid, high-power: says who?
Charging labels are everywhere, and they don't mean the same thing to everyone.
The Central Statistics Office (CSO), in its national count, calls an AC charging point "fast" above 22 kW and a DC point "fast" at 50 kW or more. On that basis, 1,883 of the 3,416 public charging points it counted at the end of 2025 were fast, though it says some operators, particularly smaller ones, weren't yet included.
ESB ecars splits its prices into "Standard (up to 48kW)" and "Fast & High-Power (49kW+)". As of 16 November 2026, its pay-as-you-go price was €0.70 per kWh for the first and €0.83 for the second, so the band affects what you pay. Other plans and contactless rates differ, and overstay fees can apply. In its terms, ESB separately defines a high-power point as 150 kW or more.
So a 100 kW charger may fit the description of high-power charging, but is below ESB's high-power threshold. The useful habit is to look past the label to the kW figure, and to remember that it's the charger's maximum, not a promise about your car.
So, what should you look for?
Three things help more than any label: your car's own limits (its onboard charger for AC and its maximum DC charging power), the charger's kW rating and connector, and the fact that the average over a session can be lower than either peak.
Next time you pull up to a charger with a big number on it, you'll know that's where the conversation starts, not where it ends. The car, the battery and even the weather all get a say, and how much the session costs is a story for another day.
Techknow Ireland is not responsible for the content of external or third-party sites.



Comments